Ablestik：

導電銀膠:主要經營有ABLEBOND 84-1A、84-1LMI、 84-1LMINB(B1)、 84-1LMISR4、84-1LMIT(T1)、 826-1DS、826-2、2600AT、2600BT、2185A、2030SC、2100A、3185、8290、8340、8360、8352L、968-2、979-1、71-1、JM7000等一系列產品,適用于半導體(IC)封裝(如DIP/SOP/TO-92/BGA...)、LED(如普通發光二極管/LAMP/大功率管/數碼管...)等領域,用于各種貼片、點膠、背膠等工藝.

絕緣膠:主要經營有ABLEBOND84-3、84-3J、84-3LV、84-3MV、789-3、789-4、2025D 、2025M、 2035SC 、8384、8387A、8387B、2039H、DX-10、DX-20-4等一系列產品,適用于半導體(IC)封裝、攝像頭(CMOS/CCD)工藝、LED、智能卡等領域,用于各種貼片、或有粘貼的等工藝.

UV膠:主要經營有ABLELUXHGA-3E、HGA-3S、A4021T、A4035T、A4039T、A4061T、A4083T、A4086T、A4088T、A4502、CC4310、AA50T 、BF-4 、OG RFI146T等一系列UV紫外固化膠,適用于光電、光電儀表、光纖、手機攝像頭(CMOS)等領域;如手機攝像頭Lens固定,光纖耦合器(Coupler),激光器(Laser),跳線(Jamper),衰減器(Attenuator),探測器(Detector)等。

膠膜:主要經營有ABLEFILM506 、508、550S、561K、570K、5020、5020K、5025E等一系列產品,適用于各種電子產品,軍工產品,電源等。

ABLESTIK JM7000具有高可靠性，低空洞特點，耐高溫可達370度。

常用超大規模集成電路封裝，陶瓷焊接封裝和焊接密封封裝

漢高ablestik JM7000高可靠性導電膠 耐高溫導電膠300度

ABLESTIK JM7000耐高溫300℃導電膠

樂泰EA 3335透明UV耐熱耐水耐腐蝕光通訊光路膠

粘度 5000-7000cp 固化條件 UV 硬度80shoreA Tg值 135℃ CTE,低于Tg溫度59ppm/℃ CTE,Tg值溫度 ppm/℃

透明，UV快速固化，良好的耐熱，耐水，耐化學腐蝕性，低揮發。
TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, HAAKE RV-20 Rotoviscometer, mPa·s (cP):
Cone 1o @ Shear rate 22 s
-1 9,000
Work Life @ 25°C, hours 8 to 16
Shelf Life @ -40°C (from date of manufacture), days 365
TYPICAL CURING PERFORMANCE
Cure Schedule
30 minutes @ 150°C
Suggested temperature cures are from 150 to 350oC. For
applications requiring higher electrical conductivity, a cure cycle of 15
minutes @ 300oC is recommended. Product properties will not be
reduced by subsequent post die attach thermal exposure, i.e.,
wirebond, and/or lid seal up to 370oC.
TYPICAL PROPERTIES OF CURED MATERIAL
Physical Properties
Coefficient of Thermal Expansion, :
Below Tg, ppm/°C 33
Glass Transition Temperature (Tg) by TMA, °C 240
Bulk Thermal Conductivity, W/(m-K):
@ 90°C 1.1
@ 165°C 1.0
Tensile Modulus, DMTA :
Cured 30 minutes @ 300oC N/mm2 10,000
(psi) (1,450,377)
Extractable Ionic Content, @ 100°C:
Chloride (Cl-) <10
Sodium (Na+) <15
Potassium (K+) <15
Decomposition (in N2):
TGA analysis @ 10oC/ minute ramp from 25 to 400
oC
@ 340oC, % 0.2
@ 400oC, % 0.3
Electrical Properties
Sample cured 30 minutes @ 300oC
Volume Resistivity, ohm-cm ≤0.01